Product 1

Handheld Ultrasonic Flow Meter

The transit time flow meter utilizes two transducers that function as both ultrasonic transmitters and receivers. The transducers are clamped on the outside of a closed pipe at a distance from each other. The transducers can be mounted in V method in which case the ultrasound transverses the pipe twice, or W method in which case the ultrasound transverses the pipe four times, or in Z method in which case the transducer are mounted on opposite sides of the pipe and the ultrasound transverses the pipe only once. The selection of mounting method depends on pipe and liquid characteristics. When flow meter works, two transducers transmit and receive the ultrasonic signal which travels firstly downstream and then travels upstream. Because ultra sound travels faster downstream than upstream, there will be a difference of time of flight (delta t). When the flow is still, the time difference (delta t) is zero. Therefore, as long as we know the time of flight both downstream and upstream, we can work out the time difference and the flow velocity (V) and flow volume (Q) the following formula.

Application

Raw Water, cooling water, DM water, hot water, chemicals, HVAC energy measurement system, Beverages, food, pharmaceutical, power plants, etc.

# Model LF-UF-P
1 Range 25-100 mm / 50 – 700 mm / 300 – 5000 mm
2 Temperature 0-80deg.C / High temp. model also available
3 Accuracy + 1% Full range
4 Response Time 500 ms
5 Frequency 1 MHz
6 Sensor Cable 5m x 2 nos.
7 Display Unit Handheld LCD display(Flow rate & totalizer)
8 Accessories Sensor gel, Mounting Clamps
9 Sensors Ultrasonic Clamp On – 2 nos
10 Protection IP65
11 Flow Unit Display M3 , litre
12 Output 4-20mA
13 Supply 3 AAA battery
14 Briefcase 1No Box

Complete Solution for Industrial Instruments & Automation Systems

Level & Flow Industrial Automation